| Property | Value |
|---|---|
| Uncured Properties | |
| Viscosity @ 25°C | 4,000 cP |
| Specific Gravity (mixed) | 1.2 |
| Reactive Solids Content | 100% |
| Pot Life | 4 hours |
| Curing Performance | |
| Cure Schedule | 5 min @ 100°C |
| Alternative Cure | 2 min @ 120°C / 1 min @ 150°C |
| Post Cure (if >150°C) | 30 min @ 150°C |
| Large Mass Gel Phase | 4 hrs @ 25°C → 5 hrs @ 100°C |
| Cured Properties | |
| Glass Transition Temperature (Tg) | 120°C |
| Coefficient of Thermal Expansion | 6.31 × 10¹ ppm/°C (Below Tg) / 2.03 × 10² ppm/°C (Above Tg) |
| Hardness (Shore D) | 87 |
| Refractive Index | 1.56 |
| Water Absorption | 0.004% |
| Spectral Transmittance (6000-9000 Å) | 93% |
| Mechanical & Electrical Properties | |
| Lap Shear Strength (Al-Al) | 2,900 psi |
| Dielectric Strength | 400 V/mil |
BERGQUIST® GAP FILLER TGF 2900LVO, a silicone-based 2-component system, delivers optimized heat transfer across ultra-thin bondline interfaces. It is engineered for automotive control modules, high-throughput manufacturing lines, and electronics sensitive to siloxane outgassing, ensuring stable operation in environments spanning -40 °C to +150 °C.
BERGQUIST® LIQUI FORM TLF 10000 addresses critical hotspots in RRU/AAU/BBU units, EV battery packs, 5G antenna modules, industrial controllers, and compact PCBs while stabilizing vertical gaps ≤2.5 mm and preserving electrostatic reliability.
TECHNOMELT® Low Pressure Molding polyamides deliver precision encapsulation of PCBs, PCBAs, connectors, sensors, power modules, LEDs, HVAC controllers, and wearable medical devices, while also enabling leakproof integration in liquid-delivery systems.
Huntsman ARALDITE® systems are designed for • Rotor potting to replace permanent magnets in magnetless motor concepts • Stator encapsulation for enhanced coil protection • High voltage impregnation processes ensuring worker safety and long term adhesion.
Techniq Vietnam provides end-to-end materials and process solutions, integrating world-class technologies in adhesives, soldering, and thermal management.
Through partnerships with leading global brands, we deliver high-value materials, expert consulting, and optimized supply chains ensuring timely delivery, efficiency, and sustainable growth for our clients.
At Techniq, our mission is to connect cutting-edge materials, processes, and equipment with customer needs, enabling efficiency, reliability, and long-term value creation.
HQ address: Thu Duc, Ho Chi Minh City, VietNam
Website: techniq.vn
Email: info@techniq.vn
Tel: +84 88 990 19 29
Copyright © TECHNIQ VIETNAM
Leave your information or connect via Hotline, and our expert team will reach out immediately to provide professional consultation and customized solutions.
Email: info@techniq.vn
Our Technical Support Team is on hand from 8:30 AM to 5:30 PM (GMT+7).
For requests outside these hours, please submit your request form and we will respond at the earliest opportunity.