LOCTITE® STYCAST CC 8555 is a one-component, UV-curable urethane acrylate conformal coating. It provides rugged protection against moisture and harsh chemicals while offering excellent adhesion to various substrates. The product gels rapidly under UV exposure and fully cures with atmospheric moisture, ensuring complete coverage even in shadowed areas. It is VOC/solvent-free and has good chemical and moisture resistance.
Key Features:
Operating Temperature: -40°C to 130°C
Key Substrates:
| Uncured Properties | Value |
|---|---|
| Appearance | Clear liquid |
| Viscosity @ 25°C (mPa.s) | 60 |
| Specific Gravity @ 25°C (g/cc) | 1.05 |
| Shelf Life @ 25°C (days) | 365 |
| Curing Performance | Condition | Value |
|---|---|---|
| Recommended UV Cure Condition | Medium-pressure mercury lamp | 365 nm wavelength |
| Exposure Time | 30 seconds | |
| Light Intensity | 300-600 mW/cm² | |
| Moisture Cure for Shadowed Areas | 50% RH, 25°C | 72 hours |
| Cured Properties | Value |
|---|---|
| Hardness (Shore A @ 20s) | 77 |
| Volume Resistivity (ohm-cm) | 1.46×10¹⁴ |
| Surface Resistivity (ohm) | 1.27×10¹⁴ |
| Dielectric Strength (kV/mm) | 27.5 |
| Dielectric Constant @ 1 MHz | 2.51 |
| Dissipation Factor @ 1 MHz | 0.057 |
| Tensile Strength (N/mm²) | 10.4 (1,510 psi) |
| Tensile Elongation at Break (%) | 31 |
BERGQUIST® GAP FILLER TGF 2900LVO, a silicone-based 2-component system, delivers optimized heat transfer across ultra-thin bondline interfaces. It is engineered for automotive control modules, high-throughput manufacturing lines, and electronics sensitive to siloxane outgassing, ensuring stable operation in environments spanning -40 °C to +150 °C.
BERGQUIST® LIQUI FORM TLF 10000 addresses critical hotspots in RRU/AAU/BBU units, EV battery packs, 5G antenna modules, industrial controllers, and compact PCBs while stabilizing vertical gaps ≤2.5 mm and preserving electrostatic reliability.
TECHNOMELT® Low Pressure Molding polyamides deliver precision encapsulation of PCBs, PCBAs, connectors, sensors, power modules, LEDs, HVAC controllers, and wearable medical devices, while also enabling leakproof integration in liquid-delivery systems.
Huntsman ARALDITE® systems are designed for • Rotor potting to replace permanent magnets in magnetless motor concepts • Stator encapsulation for enhanced coil protection • High voltage impregnation processes ensuring worker safety and long term adhesion.
Techniq Vietnam provides end-to-end materials and process solutions, integrating world-class technologies in adhesives, soldering, and thermal management.
Through partnerships with leading global brands, we deliver high-value materials, expert consulting, and optimized supply chains ensuring timely delivery, efficiency, and sustainable growth for our clients.
At Techniq, our mission is to connect cutting-edge materials, processes, and equipment with customer needs, enabling efficiency, reliability, and long-term value creation.
HQ address: Thu Duc, Ho Chi Minh City, VietNam
Website: techniq.vn
Email: info@techniq.vn
Tel: +84 88 990 19 29
Copyright © TECHNIQ VIETNAM
Leave your information or connect via Hotline, and our expert team will reach out immediately to provide professional consultation and customized solutions.
Email: info@techniq.vn
Our Technical Support Team is on hand from 8:30 AM to 5:30 PM (GMT+7).
For requests outside these hours, please submit your request form and we will respond at the earliest opportunity.