LOCTITE STYCAST PC 18M is a solvent-based, one-component urethane conformal coating. It provides excellent environmental and moisture protection while maintaining resistance to discoloration. The coating is reworkable, solvent-resistant, and cures at room temperature or with heat.
| Property | Value |
|---|---|
| Free TDI Content (%) | <1 |
| NCO Content (%) | 4.0 |
| Viscosity @ 25°C (mPa·s) | 350 |
| Solids Content (%) | 50 |
| Specific Gravity @ 25°C | 1.01 |
| Shelf Life (Days @ 25°C) | 548 |
| Flash Point (°C) | 32 |
| Cure Condition | Time |
|---|---|
| Air Dry (Room Temp, 30–50% RH) | Tack-free: 1-4 hours |
| Semi-hard film: 1 day | |
| Optimum properties: 7 days | |
| Heat Cure (Oven) | 2 hours @ 60°C |
| Property | Value |
|---|---|
| Operating Temperature (Continuous) | Up to 110°C |
| Volume Resistivity (Ω·cm) | 2×10¹³ |
| Dielectric Strength (V/mil) | 1,200 |
| Dielectric Constant @ 100KHz | 4.2 |
| Dissipation Factor @ 100KHz | 0.01 |
| Insulation Resistance (Ω) | 1×10¹⁵ (Cycle 1: 25°C/50% RH) |
| 2×10¹⁰ (Cycle 10: 65°C/95% RH) | |
| Fungus Resistance (ASTM G21) | Non-nutrient |
| Appearance After Thermal/Moisture Testing | No blistering, wrinkling, cracking, peeling, or discoloration |
BERGQUIST® GAP FILLER TGF 2900LVO, a silicone-based 2-component system, delivers optimized heat transfer across ultra-thin bondline interfaces. It is engineered for automotive control modules, high-throughput manufacturing lines, and electronics sensitive to siloxane outgassing, ensuring stable operation in environments spanning -40 °C to +150 °C.
BERGQUIST® LIQUI FORM TLF 10000 addresses critical hotspots in RRU/AAU/BBU units, EV battery packs, 5G antenna modules, industrial controllers, and compact PCBs while stabilizing vertical gaps ≤2.5 mm and preserving electrostatic reliability.
TECHNOMELT® Low Pressure Molding polyamides deliver precision encapsulation of PCBs, PCBAs, connectors, sensors, power modules, LEDs, HVAC controllers, and wearable medical devices, while also enabling leakproof integration in liquid-delivery systems.
Huntsman ARALDITE® systems are designed for • Rotor potting to replace permanent magnets in magnetless motor concepts • Stator encapsulation for enhanced coil protection • High voltage impregnation processes ensuring worker safety and long term adhesion.
Techniq Vietnam provides end-to-end materials and process solutions, integrating world-class technologies in adhesives, soldering, and thermal management.
Through partnerships with leading global brands, we deliver high-value materials, expert consulting, and optimized supply chains ensuring timely delivery, efficiency, and sustainable growth for our clients.
At Techniq, our mission is to connect cutting-edge materials, processes, and equipment with customer needs, enabling efficiency, reliability, and long-term value creation.
HQ address: Thu Duc, Ho Chi Minh City, VietNam
Website: techniq.vn
Email: info@techniq.vn
Tel: +84 88 990 19 29
Copyright © TECHNIQ VIETNAM
Leave your information or connect via Hotline, and our expert team will reach out immediately to provide professional consultation and customized solutions.
Email: info@techniq.vn
Our Technical Support Team is on hand from 8:30 AM to 5:30 PM (GMT+7).
For requests outside these hours, please submit your request form and we will respond at the earliest opportunity.