• Item Name: 3M™ Scotch-Weld™ Epoxy Adhesive DP110 Translucent and Gray
• Manufacturer: 3M
• Technologies: Two-part epoxy adhesive; Duo-Pak cartridge dispensing; controlled flow; fast handling strength
• Color: Translucent/Yellow (Base), White/Light Yellow (Accelerator); Gray/Black (Base and Accelerator)
• Cure Type: Room temperature cure; full cure in 48 hours; heat accelerates cure to 200°F (93°C)
• Package Size: Duo-Pak cartridges (48.5–50 ml, 200 ml, 400 ml); bulk containers
• Shelf Life: 24 months in unopened containers
3M™ Scotch-Weld™ Epoxy Adhesive DP110 (Translucent and Gray) is a two-part epoxy adhesive that combines fast curing with flexibility. It features controlled flow, a 20-minute handling strength, good adhesion to a wide range of plastics and metals, and comes in a Duo-Pak cartridge for easy dispensing.
Structural bonding of metals, plastics, and rubbers
High-strength aluminum and steel assemblies
Applications requiring controlled flow and quick handling
General industrial bonding where flexibility and moderate thermal resistance are required
Note: Performance may vary under high humidity, hot water, or aggressive environmental conditions; testing is recommended for such conditions.
| Property | DP110 Translucent | DP110 Gray |
|---|---|---|
| Viscosity @ 72-73°F (23-24°C) Base (CPS) | 30,000–70,000 | 40,000–90,000 |
| Viscosity @ 72-73°F (23-24°C) Accelerator (CPS) | 30,000–70,000 | 40,000–90,000 |
| Base Resin | Modified Epoxy | Modified Epoxy |
| Accelerator | Amine | Amine |
| Color Base | Translucent White | White |
| Color Accelerator | Light Yellow | Black |
| Net Weight Base (lbs/gal) | 9.1–9.4 | 9.1–9.4 |
| Net Weight Accelerator (lbs/gal) | 9.0–9.3 | 9.0–9.3 |
| Mix Ratio Volume | 100:100 | 100:100 |
| Mix Ratio Weight (B:A) | 100:99 | 100:99 |
| Worklife @ 73°F (24°C) | 8–13 min | 8–13 min |
| Property | DP110 Translucent | DP110 Gray |
|---|---|---|
| Color | Yellow Translucent | Gray |
| Shore D Hardness | 40 | 45 |
| Elongation | 40% | 40% |
| Thermal Conductivity (BTU/Hr/Ft²/°F) @ 113°F (45°C) | 0.106 | 0.104 |
| Thermal Coefficient of Expansion (-58°F to 32°F / -58°F to 166°F) | 80×10⁻⁶ / 200×10⁻⁶ | 73×10⁻⁶ / 165×10⁻⁶ |
| Glass Transition Temp. | 55°F (13°C) | 61°F (16°C) |
| Dielectric Strength (volts/mil) | 520 | 470 |
| Volume Resistivity (ohms·cm) | 4.5 x 10¹⁰ | 6.9 x 10¹⁰ |
| Test | DP110 Translucent | DP110 Gray |
|---|---|---|
| Overlap Shear (psi) | 2500 | 3500 |
| Aluminum T-Peel (piw) | 20 | 20 |
| Overlap Shear – Metals & Plastics (psi) | See table below | See table below |
Substrate Overlap Shear @ 75°F (24°C):
| Substrate | DP110 Translucent | DP110 Gray |
|---|---|---|
| Aluminum/Aluminum | 1000 | 2300 |
| Cold Rolled Steel | 1500 | 2500 |
| Stainless Steel | 1500 | 2450 |
| Galvanized Steel | 1500 | 2600 |
| Copper | 1500 | 1750 |
| Brass | 1500 | 2450 |
| Styrene Butadiene Rubber/Steel | 80–100 | 80–100 |
| Neoprene Rubber/Steel | 40–60 | 40–60 |
| ABS/ABS Plastic | 500 | 680 |
| PVC/PVC | 400 | 390 |
| Polycarbonate/Polycarbonate | 500 | 660 |
| Acrylic/Acrylic | 250 | 480 |
| Fiber Reinforced Polyester | 1400* | 1400* |
LOCTITE ECCOBOND UF 9000AG-061 is specifically formulated for FCBGA and Cu pillar flip chip packaging, ensuring robust solder joint encapsulation under extreme electrothermal cycling from -65 °C to 150 °C. Its superior capillary flow also optimizes throughput in automated assembly lines for high-density ICs.
BERGQUIST microTIM mTIM 1028 is purpose built for riding cage assemblies in servers, switches, and routers, interfacing with electroless nickel plated copper or aluminum heat sinks. It ensures stable operation in high power transceiver modules while also extending applicability to liquid cooling components, heat pipes, and fin based dissipative structures.
LOCTITE® ABLESTIK NCA 3218 is specifically formulated for ADAS optical modules, ensuring secure bonding in lens barrel to housing and lens housing to circuit board interfaces where dimensional accuracy and dielectric integrity are non negotiable.
Loctite® 3296, a dual cure (UV & thermal) adhesive, is engineered for active alignment assembly of ADAS cameras and LiDAR modules. Its optimized bonding to aluminum and FR4 substrates ensures secure fixation of optical components while enabling nanometer level alignment critical for high resolution imaging.
Techniq Vietnam provides end-to-end materials and process solutions, integrating world-class technologies in adhesives, soldering, and thermal management.
Through partnerships with leading global brands, we deliver high-value materials, expert consulting, and optimized supply chains ensuring timely delivery, efficiency, and sustainable growth for our clients.
At Techniq, our mission is to connect cutting-edge materials, processes, and equipment with customer needs, enabling efficiency, reliability, and long-term value creation.
Tel: +84 88 990 19 29
Copyright © TECHNIQ VIETNAM
Leave your information or connect via Hotline, and our expert team will reach out immediately to provide professional consultation and customized solutions.
Email: info@techniq.vn
Our Technical Support Team is on hand from 8:30 AM to 5:30 PM (GMT+7).
For requests outside these hours, please submit your request form and we will respond at the earliest opportunity.