• Item Name: Dobeckan® FN 3400 LV
• Manufacturer: ELANTAS Europe / ELANTAS Italia Quattordio Site
• Technologies: Single-component DAP polyester resin, low VOC, thermal class H, high dielectric and mechanical properties
• Color: Yellowish
• Cure Type: Heat cure (oven)
• Package Size: Contact to Techniq VN for details.
• Shelf Life: 12 months
Dobeckan® FN 3400 LV is a single-component, low-viscosity impregnating resin based on unsaturated polyester with DAP (diallyl phthalate) reactive thinner. It is designed for electrical insulation systems, offering high winding penetration, minimal drain losses, and excellent long-term thermal stability. The cured resin is tough, mechanically strong, and resistant to chemicals and vapors. Thermal class is H (180 °C), UL approved.
Impregnation of small, medium, and large motors (up to sizes 180–190), particularly under reciprocating operation
Use in transformers and electrical machines requiring thermal class H
Suitable for dipping, dip-rolling, and vacuum processes for compact windings and bandaged components
| Property | Condition / Method | Value | Unit |
|---|---|---|---|
| Shelf Life | 23 °C | 12 | months |
| Appearance / Colour | – | Liquid / Yellowish | – |
| Density | DIN 51757, 23 °C | 1110–1150 | g/cm³ |
| Binder Content | IEC 464-2 (1.5 g, 1h/150 °C) | 100 | % |
| Flow Time | ISO 2431, Ford Cup 4, 25 °C | 70–100 | sec |
| Flash Point | – | 160 | °C |
| Gel Time (Initial, 100 °C) | Deatech test | 50–90 | min |
| Temperature (°C) | 100 | 110 | 120 | 130 | 140 | 150 |
|---|---|---|---|---|---|---|
| Curing Time (h) | 12 | 8 | 6 | 4 | – | – |
| Property | Condition / Method | Value | Unit |
|---|---|---|---|
| Bond Strength | Twisted coil, 23 °C | >180 | N |
| 155 °C | >110 | N | |
| 180 °C | >60 | N | |
| Bond Strength (Helical coil) | IEC 60290, 199 °C | 20–22 | N |
| Bond Strength (Twisted pair) | IEC 60172, 188 °C | 1000 | V |
| Property | Condition | Value | Unit |
|---|---|---|---|
| Volume Resistivity (after water immersion) | Initial / 7 d, IEC 60464-2 | >10¹⁵ | Ω·cm |
| Volume Resistivity (elevated temp) | 155 °C / 180 °C, IEC 60464-2 | >10¹¹ / – | Ω·cm |
| Electrical Strength (after water immersion) | Initial / 24 h, IEC 60464-2 | >120 / >140 | kV/mm |
| Electrical Strength (elevated temp) | 155 °C / 180 °C, IEC 60464-2 | >100 / – | kV/mm |
| Temperature at εr tan δ = 0.1 | IEC 60250, 50 Hz / 1 kHz / 10 kHz | >100 / >155 / >155 | °C |
| Property | Condition / Test | Result / Value | Unit |
|---|---|---|---|
| Resistance to solvent vapors | Acetone, Xylene, Methanol, Hexane, CS₂ | Resistant | – |
| Water Absorption | IEC 62, 23 °C / 0.5 h at 100 °C | <5 / <10 | mg |
| Resistance to liquids | IEC 175, Ammonia (10%), Acetic acid (5%), NaOH (1%), HCl (10%), H₂SO₄ (30%), Iso-octane, Toluene, Transformer oil, BeckFluid 9902, Detergent solution | <5–<50 | mg |
LOCTITE ECCOBOND UF 9000AG-061 is specifically formulated for FCBGA and Cu pillar flip chip packaging, ensuring robust solder joint encapsulation under extreme electrothermal cycling from -65 °C to 150 °C. Its superior capillary flow also optimizes throughput in automated assembly lines for high-density ICs.
BERGQUIST microTIM mTIM 1028 is purpose built for riding cage assemblies in servers, switches, and routers, interfacing with electroless nickel plated copper or aluminum heat sinks. It ensures stable operation in high power transceiver modules while also extending applicability to liquid cooling components, heat pipes, and fin based dissipative structures.
LOCTITE® ABLESTIK NCA 3218 is specifically formulated for ADAS optical modules, ensuring secure bonding in lens barrel to housing and lens housing to circuit board interfaces where dimensional accuracy and dielectric integrity are non negotiable.
Loctite® 3296, a dual cure (UV & thermal) adhesive, is engineered for active alignment assembly of ADAS cameras and LiDAR modules. Its optimized bonding to aluminum and FR4 substrates ensures secure fixation of optical components while enabling nanometer level alignment critical for high resolution imaging.
Techniq Vietnam provides end-to-end materials and process solutions, integrating world-class technologies in adhesives, soldering, and thermal management.
Through partnerships with leading global brands, we deliver high-value materials, expert consulting, and optimized supply chains ensuring timely delivery, efficiency, and sustainable growth for our clients.
At Techniq, our mission is to connect cutting-edge materials, processes, and equipment with customer needs, enabling efficiency, reliability, and long-term value creation.
Tel: +84 88 990 19 29
Copyright © TECHNIQ VIETNAM
Leave your information or connect via Hotline, and our expert team will reach out immediately to provide professional consultation and customized solutions.
Email: info@techniq.vn
Our Technical Support Team is on hand from 8:30 AM to 5:30 PM (GMT+7).
For requests outside these hours, please submit your request form and we will respond at the earliest opportunity.