• Item Name: THERM-A-GAP™ GEL 30
• Manufacturer: Parker Chomerics (Parker Hannifin)
• Technologies: Fully cured, one-component dispensable thermal interface gel
• Color: Pink
• Cure Type: No secondary curing required
• Package Size: 10cc syringe, 30cc syringe, 300cc cartridge, 1-gallon pail
• Shelf Life: 18 months
Parker Chomerics THERM-A-GAP™ GEL 30 is a fully cured, high-performance, dispensable thermal interface gel with a thermal conductivity of 3.5 W/m-K. It is engineered to simplify manufacturing by eliminating the need for mixing, curing, or hand assembly, thereby lowering installation costs and reducing logistical complexity. The gel provides low thermal impedance across thin and thick gaps, withstands extreme thermal cycling, and requires ultra-low compressive force, minimizing stress on sensitive components. Reworkable and compatible with automated dispensing, it offers reliable long-term thermal management for demanding electronic applications.
Automotive electronic control units (ECUs).
Power supplies and semiconductor devices.
Memory and power modules.
Microprocessors and graphics processors.
Flat panel displays and consumer electronics.
| Property | Value | Notes / Test Method |
|---|---|---|
| Color | Pink | Visual |
| Flow Rate | 20 g/min | 30cc syringe, 0.100” orifice, 90 psi |
| Specific Gravity | 3.1 | ASTM D792 |
| Min. Bondline Thickness | 0.004 in (0.10 mm) | Chomerics |
| Thermal Conductivity | 3.5 W/m-K | ASTM D5470 |
| Heat Capacity | 1 J/g-K | ASTM E1269 |
| Operating Temp. Range | -67 to 392°F (-55 to 200°C) | Chomerics |
| Dielectric Strength | 200 Vac/mil (8.0 kVac/mm) | ASTM D149 |
| Volume Resistivity | 1×10¹⁴ ohm-cm | ASTM D257 |
| Dielectric Constant | 7.0 @ 1,000 kHz, 0.76 mm | ASTM D150 |
| Dissipation Factor | 0.002 @ 1,000 kHz, 0.76 mm | Chomerics |
| Flammability | UL94 V-0 | UL Certification |
| Outgassing | 0.15% TML / 0.05% CVCM | ASTM E595 |
| Shelf Life | 18 months | 50–90°F (10–32°C), 50% RH |
| RoHS | Compliant | Certified |
Packaging Options: 10cc syringes, 30cc syringes (tapered tip or EFD), 300cc aluminum cartridge, and 1-gal pails.
BERGQUIST® GAP FILLER TGF 2900LVO, a silicone-based 2-component system, delivers optimized heat transfer across ultra-thin bondline interfaces. It is engineered for automotive control modules, high-throughput manufacturing lines, and electronics sensitive to siloxane outgassing, ensuring stable operation in environments spanning -40 °C to +150 °C.
BERGQUIST® LIQUI FORM TLF 10000 addresses critical hotspots in RRU/AAU/BBU units, EV battery packs, 5G antenna modules, industrial controllers, and compact PCBs while stabilizing vertical gaps ≤2.5 mm and preserving electrostatic reliability.
TECHNOMELT® Low Pressure Molding polyamides deliver precision encapsulation of PCBs, PCBAs, connectors, sensors, power modules, LEDs, HVAC controllers, and wearable medical devices, while also enabling leakproof integration in liquid-delivery systems.
Huntsman ARALDITE® systems are designed for • Rotor potting to replace permanent magnets in magnetless motor concepts • Stator encapsulation for enhanced coil protection • High voltage impregnation processes ensuring worker safety and long term adhesion.
Techniq Vietnam provides end-to-end materials and process solutions, integrating world-class technologies in adhesives, soldering, and thermal management.
Through partnerships with leading global brands, we deliver high-value materials, expert consulting, and optimized supply chains ensuring timely delivery, efficiency, and sustainable growth for our clients.
At Techniq, our mission is to connect cutting-edge materials, processes, and equipment with customer needs, enabling efficiency, reliability, and long-term value creation.
HQ address: Thu Duc, Ho Chi Minh City, VietNam
Website: techniq.vn
Email: info@techniq.vn
Tel: +84 88 990 19 29
Copyright © TECHNIQ VIETNAM
Leave your information or connect via Hotline, and our expert team will reach out immediately to provide professional consultation and customized solutions.
Email: info@techniq.vn
Our Technical Support Team is on hand from 8:30 AM to 5:30 PM (GMT+7).
For requests outside these hours, please submit your request form and we will respond at the earliest opportunity.