LOCTITE® 4013™ is a medium-viscosity, one-part cyanoacrylate adhesive that cures with humidity. It is designed for fast room-temperature fixturing and is suitable for bonding plastics and metals. This product is specifically formulated for assembling disposable medical devices and meets ISO 10993 biocompatibility standards.
| Property | Value/Condition |
|---|---|
| Uncured Properties | |
| Appearance | Transparent, colorless to slightly yellow liquid |
| Specific Gravity @ 25°C | 1.1 |
| Viscosity (Brookfield LVF, 25°C) | 400 to 800 mPa·s (Spindle 2, 30 rpm) |
| Cure Mechanism | Humidity |
| Cured Properties (After 24 hours @ 22°C) | |
| Tensile Strength (ISO 527-3) | 28 N/mm² (4,000 psi) |
| Elongation (ISO 527-2) | 2% |
| Shore Hardness (ISO 868) | 65 |
| Lap Shear Strength (N/mm²) | |
| Steel (grit blasted) | ≥12 (≥1,740 psi) |
| PVC to PVC | >5 (>725 psi) |
| ABS to ABS | >4 (>580 psi) |
| Polycarbonate to Polycarbonate | >7 (>1,015 psi) |
| Stainless Steel to ABS | >5 (>725 psi) |
| Stainless Steel to PVC | >4 (>580 psi) |
| Stainless Steel to Polycarbonate | >4 (>580 psi) |
| Stainless Steel to Polyurethane | 1.5 (220 psi) |
| Curing Performance | |
| Fixture Time (PVC to PVC) | 20 to 25 sec |
| Fixture Time (ABS to ABS) | 5 to 10 sec |
| Fixture Time (Polycarbonate to Polycarbonate) | 10 sec |
| Fixture Time (Stainless Steel to PVC) | 5 to 10 sec |
| Fixture Time (Stainless Steel to Polyurethane) | 15 to 20 sec |
| Environmental Resistance (Humidity, 38°C, 85% RH) | |
| Lap Shear Strength (After 4 weeks) | PVC to PVC: >5 N/mm², ABS to ABS: >4 N/mm² |
| Sterilization Resistance | Maintains bond strength after 1 cycle of steam autoclave |
BERGQUIST® GAP FILLER TGF 2900LVO, a silicone-based 2-component system, delivers optimized heat transfer across ultra-thin bondline interfaces. It is engineered for automotive control modules, high-throughput manufacturing lines, and electronics sensitive to siloxane outgassing, ensuring stable operation in environments spanning -40 °C to +150 °C.
BERGQUIST® LIQUI FORM TLF 10000 addresses critical hotspots in RRU/AAU/BBU units, EV battery packs, 5G antenna modules, industrial controllers, and compact PCBs while stabilizing vertical gaps ≤2.5 mm and preserving electrostatic reliability.
TECHNOMELT® Low Pressure Molding polyamides deliver precision encapsulation of PCBs, PCBAs, connectors, sensors, power modules, LEDs, HVAC controllers, and wearable medical devices, while also enabling leakproof integration in liquid-delivery systems.
Huntsman ARALDITE® systems are designed for • Rotor potting to replace permanent magnets in magnetless motor concepts • Stator encapsulation for enhanced coil protection • High voltage impregnation processes ensuring worker safety and long term adhesion.
Techniq Vietnam provides end-to-end materials and process solutions, integrating world-class technologies in adhesives, soldering, and thermal management.
Through partnerships with leading global brands, we deliver high-value materials, expert consulting, and optimized supply chains ensuring timely delivery, efficiency, and sustainable growth for our clients.
At Techniq, our mission is to connect cutting-edge materials, processes, and equipment with customer needs, enabling efficiency, reliability, and long-term value creation.
HQ address: Thu Duc, Ho Chi Minh City, VietNam
Website: techniq.vn
Email: info@techniq.vn
Tel: +84 88 990 19 29
Copyright © TECHNIQ VIETNAM
Leave your information or connect via Hotline, and our expert team will reach out immediately to provide professional consultation and customized solutions.
Email: info@techniq.vn
Our Technical Support Team is on hand from 8:30 AM to 5:30 PM (GMT+7).
For requests outside these hours, please submit your request form and we will respond at the earliest opportunity.