• Item Name: DOWSIL™ TC-4025 Dispensable Thermal Pad
• Manufacturer: Dow
• Technologies: Two-part polydimethylsiloxane (thermally conductive dispensable pad)
• Color: Part A – White to Off-White, Part B – Blue, Mixed – Blue
• Cure Type: Room temperature cure, heat accelerated
• Package Size: Contact to Techniq VN for details.
• Shelf Life: 9 months
DOWSIL™ TC-4025 is a two-part, 1:1 mix ratio, thermally conductive dispensable pad formulated for gap filling and thermal management in electronic devices. It cures into a flexible elastomer with strong thermal conductivity, stress relief, and shock-damping properties. The material is printable or dispensable, reworkable, and offers lower cost of ownership than fabricated pads. It operates reliably in the range of -45°C to 200°C, making it suitable for demanding environments.
Thermal interface material for telecom equipment, lamps, and luminaires.
Gap-filling for improved heat dissipation in compact consumer and electronic devices.
Applied through automated dispensing, stencil printing, or screen printing.
| Property | Condition | Value |
|---|---|---|
| Part A Color | – | White to Off-White |
| Part B Color | – | Blue |
| Mixed Color | – | Blue |
| Viscosity (Part A) | – | 126,000 cPs |
| Viscosity (Part B) | – | 127,000 cPs |
| Viscosity (Mixed) | – | 119,000 cPs |
| Specific Gravity (Cured) | – | 2.81 g/cm³ |
| Working Time (Pot Life) | 25°C: 5 h | |
| Cure Time at 25°C | – | 24 h |
| Heat Cure Time | 125°C: 30 min | |
| Durometer Hardness | Shore 00 | 61 |
| Thermal Conductivity | – | 2.51 W/mK |
| Tensile Strength | – | 0.34 MPa |
| Elongation | – | 66% |
| Dielectric Strength | – | 15.4 kV/mm |
| Volume Resistivity | – | 8.84 × 10¹³ Ω·cm |
| Dielectric Constant | 100 Hz: 3.31 / 100 kHz: 2.94 | |
| Dissipation Factor | 100 Hz: 0.34 / 100 kHz: 0.004 | |
| Flammability | UL94 | V-0 |
| Shelf Life | – | 9 months |
BERGQUIST® GAP FILLER TGF 2900LVO, a silicone-based 2-component system, delivers optimized heat transfer across ultra-thin bondline interfaces. It is engineered for automotive control modules, high-throughput manufacturing lines, and electronics sensitive to siloxane outgassing, ensuring stable operation in environments spanning -40 °C to +150 °C.
BERGQUIST® LIQUI FORM TLF 10000 addresses critical hotspots in RRU/AAU/BBU units, EV battery packs, 5G antenna modules, industrial controllers, and compact PCBs while stabilizing vertical gaps ≤2.5 mm and preserving electrostatic reliability.
TECHNOMELT® Low Pressure Molding polyamides deliver precision encapsulation of PCBs, PCBAs, connectors, sensors, power modules, LEDs, HVAC controllers, and wearable medical devices, while also enabling leakproof integration in liquid-delivery systems.
Huntsman ARALDITE® systems are designed for • Rotor potting to replace permanent magnets in magnetless motor concepts • Stator encapsulation for enhanced coil protection • High voltage impregnation processes ensuring worker safety and long term adhesion.
Techniq Vietnam provides end-to-end materials and process solutions, integrating world-class technologies in adhesives, soldering, and thermal management.
Through partnerships with leading global brands, we deliver high-value materials, expert consulting, and optimized supply chains ensuring timely delivery, efficiency, and sustainable growth for our clients.
At Techniq, our mission is to connect cutting-edge materials, processes, and equipment with customer needs, enabling efficiency, reliability, and long-term value creation.
HQ address: Thu Duc, Ho Chi Minh City, VietNam
Website: techniq.vn
Email: info@techniq.vn
Tel: +84 88 990 19 29
Copyright © TECHNIQ VIETNAM
Leave your information or connect via Hotline, and our expert team will reach out immediately to provide professional consultation and customized solutions.
Email: info@techniq.vn
Our Technical Support Team is on hand from 8:30 AM to 5:30 PM (GMT+7).
For requests outside these hours, please submit your request form and we will respond at the earliest opportunity.