• Item Name: Fine-L-Kote™ SRV Silicone Coating
• Manufacturer: Techspray® / ITW Contamination Control BV
• Technologies: One-part, moisture/humidity-cured silicone conformal coating with low VOC content
• Color: Translucent (clear)
• Cure Type: Ambient room temperature; optional mild heat acceleration
• Package Size: 1 pint / 0.47L, 1 gallon / 3.8L, 5 gallon / 18.9L, 54 gallon / 204L (Standard & High Viscosity options)
• Shelf Life: 12 months from production date
Fine-L-Kote™ SRV is a one-part, clear silicone conformal coating that provides moisture- and abrasion-resistant protection after curing. It cures at ambient conditions using a moisture-based mechanism, forming a resilient, elastoplastic surface with excellent flexibility. This coating offers low VOC content, UV inspection capability, and UL 94 V-0 flammability rating. It protects electronic components against moisture, salt, fungus, corrosive vapors, and thermal/mechanical stresses while enhancing insulation, soil repellency, and component lifespan. Heat can optionally accelerate curing without the need for ovens.
Data communications equipment
Instrumentation
Automotive manufacturing
Marine manufacturing
Process control systems
Before Curing / Ready-to-Use
| Property | Standard Viscosity | High Viscosity (950) |
|---|---|---|
| Physical State | One-part liquid | One-part liquid |
| Color | Translucent (clear) | Translucent (clear) |
| Viscosity (cP) | 82 ± 20 | 950 ± 100 |
| Specific Gravity @68°F | 0.85 | 0.95 |
| Solids / NVC (%) | 45 ± 5 | 85 ± 5 |
| VOC (CARB) | 25.2% | 4.7% |
| VOC (SCAQMD) | 415 g/L | 152 g/L |
| VOC (Federal) | 13.2% | 3.8% |
| Flash Point | 10°F (-12.2°C) | 10°F (-12.2°C) |
| UV Indicator | Yes | Yes |
| RoHS Compliant | Yes | Yes |
| Shelf Life | 12 months | 12 months |
| Coverage (1 mil dry film) | 723 ft²/gal | 1285 ft²/gal |
After Curing / Fully Cured Film
| Property | Value |
|---|---|
| Tack-Free Time (Ambient) | 30 min |
| Full Cure (Ambient) | 24 hrs @ 77°F / 25°C, 30–60% RH |
| Operating Temp Range | -76°F to 392°F / -60°C to 200°C |
| Hardness (Shore A) | 90 |
| Hardness (Shore D) | 88 |
| Dielectric Strength | >720 V/mil (>28 kV/mm) |
| Volume Resistivity | >1.4 × 10¹² ohm-cm |
| Dielectric Constant | 3.75 (100 Hz), 3.85 (100 kHz) |
| Dissipation Factor | 1.017 (100 Hz), 0.719 (100 kHz) |
| Moisture Resistance | Excellent |
| Soil Resistance | Excellent |
| Flexibility | Excellent |
| Abrasion Resistance | Fair |
| Solvent Resistance | Good |
| Adhesion | Excellent |
| Removability / Repairability | Excellent |
BERGQUIST® GAP FILLER TGF 2900LVO, a silicone-based 2-component system, delivers optimized heat transfer across ultra-thin bondline interfaces. It is engineered for automotive control modules, high-throughput manufacturing lines, and electronics sensitive to siloxane outgassing, ensuring stable operation in environments spanning -40 °C to +150 °C.
BERGQUIST® LIQUI FORM TLF 10000 addresses critical hotspots in RRU/AAU/BBU units, EV battery packs, 5G antenna modules, industrial controllers, and compact PCBs while stabilizing vertical gaps ≤2.5 mm and preserving electrostatic reliability.
TECHNOMELT® Low Pressure Molding polyamides deliver precision encapsulation of PCBs, PCBAs, connectors, sensors, power modules, LEDs, HVAC controllers, and wearable medical devices, while also enabling leakproof integration in liquid-delivery systems.
Huntsman ARALDITE® systems are designed for • Rotor potting to replace permanent magnets in magnetless motor concepts • Stator encapsulation for enhanced coil protection • High voltage impregnation processes ensuring worker safety and long term adhesion.
Techniq Vietnam provides end-to-end materials and process solutions, integrating world-class technologies in adhesives, soldering, and thermal management.
Through partnerships with leading global brands, we deliver high-value materials, expert consulting, and optimized supply chains ensuring timely delivery, efficiency, and sustainable growth for our clients.
At Techniq, our mission is to connect cutting-edge materials, processes, and equipment with customer needs, enabling efficiency, reliability, and long-term value creation.
HQ address: Thu Duc, Ho Chi Minh City, VietNam
Website: techniq.vn
Email: info@techniq.vn
Tel: +84 88 990 19 29
Copyright © TECHNIQ VIETNAM
Leave your information or connect via Hotline, and our expert team will reach out immediately to provide professional consultation and customized solutions.
Email: info@techniq.vn
Our Technical Support Team is on hand from 8:30 AM to 5:30 PM (GMT+7).
For requests outside these hours, please submit your request form and we will respond at the earliest opportunity.