Mould Release QZ 13 is a high-performance release agent based on solvent-containing silicone oil. It is designed for the pre-treatment of moulds and models to ensure trouble-free de-moulding of Araldite® epoxy resins, Arathane® polyurethane systems, castings, mouldings, and laminates. It enables smooth de-moulding even at elevated mould temperatures above 150 °C and ensures precise reproduction of surface details.
Release agent for epoxy resin and polyurethane castings, mouldings, and laminates.
Suitable for both cold-curing and hot-curing processes (20 °C – 180 °C).
Effective in automatic pressure gelation processes.
Recommended for steel, aluminium alloy, and slightly porous moulds (e.g., cast aluminium).
Application methods: brush, rag, spray gun, or vaporiser.
| Property | Value |
|---|---|
| Physical form | Liquid, low-viscosity, solvent-containing silicone oil |
| Viscosity at 20 °C (ISO 12058) | ~4 mPa·s |
| Specific Gravity at 20 °C (ISO 1675) | ~0.86 g/cm³ |
| Flash Point (DIN 53213) | >25 °C |
| Solvent Content (ISO 787-2) | 68 – 72% |
| Vapour Pressure at 20 °C | ~33 mbar |
LOCTITE ECCOBOND UF 9000AG-061 is specifically formulated for FCBGA and Cu pillar flip chip packaging, ensuring robust solder joint encapsulation under extreme electrothermal cycling from -65 °C to 150 °C. Its superior capillary flow also optimizes throughput in automated assembly lines for high-density ICs.
BERGQUIST microTIM mTIM 1028 is purpose built for riding cage assemblies in servers, switches, and routers, interfacing with electroless nickel plated copper or aluminum heat sinks. It ensures stable operation in high power transceiver modules while also extending applicability to liquid cooling components, heat pipes, and fin based dissipative structures.
LOCTITE® ABLESTIK NCA 3218 is specifically formulated for ADAS optical modules, ensuring secure bonding in lens barrel to housing and lens housing to circuit board interfaces where dimensional accuracy and dielectric integrity are non negotiable.
Loctite® 3296, a dual cure (UV & thermal) adhesive, is engineered for active alignment assembly of ADAS cameras and LiDAR modules. Its optimized bonding to aluminum and FR4 substrates ensures secure fixation of optical components while enabling nanometer level alignment critical for high resolution imaging.
Techniq Vietnam provides end-to-end materials and process solutions, integrating world-class technologies in adhesives, soldering, and thermal management.
Through partnerships with leading global brands, we deliver high-value materials, expert consulting, and optimized supply chains ensuring timely delivery, efficiency, and sustainable growth for our clients.
At Techniq, our mission is to connect cutting-edge materials, processes, and equipment with customer needs, enabling efficiency, reliability, and long-term value creation.
Tel: +84 88 990 19 29
Copyright © TECHNIQ VIETNAM
Leave your information or connect via Hotline, and our expert team will reach out immediately to provide professional consultation and customized solutions.
Email: info@techniq.vn
Our Technical Support Team is on hand from 8:30 AM to 5:30 PM (GMT+7).
For requests outside these hours, please submit your request form and we will respond at the earliest opportunity.