LOCTITE® 382™ is a high-viscosity, single-part cyanoacrylate adhesive designed for electronics applications. It provides fast curing when used with TAK PAK® accelerators and is suitable for bonding rubbers, plastics, and metals.
| Property | Value |
|---|---|
| Uncured Properties | |
| Appearance | Water white to slightly cloudy gel |
| Specific Gravity | 1.05 |
| Viscosity (25°C, mPa·s) | 4,000 – 8,000 |
| Curing Performance | |
| Fixture Time (Steel) | 20 – 50 sec |
| Fixture Time (Aluminum) | 10 – 30 sec |
| Fixture Time (Neoprene) | <5 sec |
| Full Strength Development | 24 hours |
| Cured Properties | |
| Thermal Expansion Coefficient | 80 × 10⁻⁶ K⁻¹ |
| Thermal Conductivity | 0.1 W/(m·K) |
| Glass Transition Temperature | 120°C |
| Electrical Properties | |
| Dielectric Constant (1 kHz) | 2.3 |
| Volume Resistivity | 10¹⁵ Ω·cm |
| Dielectric Breakdown Strength | 25 kV/mm |
| Mechanical Performance | |
| Tensile Strength (Buna-N) | ≥7.0 N/mm² (≥1,015 psi) |
| Lap Shear Strength (Steel, 24h) | 18 – 26 N/mm² (2,610 – 3,770 psi) |
| Lap Shear Strength (Aluminum, 24h) | 11 – 19 N/mm² (1,595 – 2,755 psi) |
| Environmental Resistance | |
| Heat Resistance (121°C, Steel) | ≥8.3 N/mm² |
| Chemical Resistance | Excellent against motor oil, gasoline, isopropanol, industrial alcohol, and Freon TA |
BERGQUIST® GAP FILLER TGF 2900LVO, a silicone-based 2-component system, delivers optimized heat transfer across ultra-thin bondline interfaces. It is engineered for automotive control modules, high-throughput manufacturing lines, and electronics sensitive to siloxane outgassing, ensuring stable operation in environments spanning -40 °C to +150 °C.
BERGQUIST® LIQUI FORM TLF 10000 addresses critical hotspots in RRU/AAU/BBU units, EV battery packs, 5G antenna modules, industrial controllers, and compact PCBs while stabilizing vertical gaps ≤2.5 mm and preserving electrostatic reliability.
TECHNOMELT® Low Pressure Molding polyamides deliver precision encapsulation of PCBs, PCBAs, connectors, sensors, power modules, LEDs, HVAC controllers, and wearable medical devices, while also enabling leakproof integration in liquid-delivery systems.
Huntsman ARALDITE® systems are designed for • Rotor potting to replace permanent magnets in magnetless motor concepts • Stator encapsulation for enhanced coil protection • High voltage impregnation processes ensuring worker safety and long term adhesion.
Techniq Vietnam provides end-to-end materials and process solutions, integrating world-class technologies in adhesives, soldering, and thermal management.
Through partnerships with leading global brands, we deliver high-value materials, expert consulting, and optimized supply chains ensuring timely delivery, efficiency, and sustainable growth for our clients.
At Techniq, our mission is to connect cutting-edge materials, processes, and equipment with customer needs, enabling efficiency, reliability, and long-term value creation.
HQ address: Thu Duc, Ho Chi Minh City, VietNam
Website: techniq.vn
Email: info@techniq.vn
Tel: +84 88 990 19 29
Copyright © TECHNIQ VIETNAM
Leave your information or connect via Hotline, and our expert team will reach out immediately to provide professional consultation and customized solutions.
Email: info@techniq.vn
Our Technical Support Team is on hand from 8:30 AM to 5:30 PM (GMT+7).
For requests outside these hours, please submit your request form and we will respond at the earliest opportunity.