LOCTITE® 416™ is a high-viscosity, general-purpose cyanoacrylate instant adhesive designed for bonding plastics, rubbers, and metals. It cures rapidly with moisture and meets military specifications Mil-A-46050C and Commercial Item Description A-A-3097.
| Property | Value |
|---|---|
| Chemical Type | Ethyl Cyanoacrylate |
| Appearance | Transparent clear liquid |
| Specific Gravity @ 25°C | 1.05 |
| Viscosity (mPa·s) | 900 – 1,500 (Cone & Plate, 25°C) |
| Flash Point | See SDS |
| Substrate | Fixture Time (seconds) |
|---|---|
| Mild Steel | 20 – 50 |
| Aluminum | 10 – 30 |
| ABS | 15 – 40 |
| PVC | 20 – 50 |
| Nitrile Rubber | <5 |
| Polycarbonate | 30 – 70 |
Cure time is influenced by bond gap, humidity, and use of activators.
| Property | Value |
|---|---|
| Thermal Expansion | 100 × 10⁻⁶ K⁻¹ |
| Thermal Conductivity | 0.1 W/(m·K) |
| Softening Point | 165°C |
| Volume Resistivity | 2×10¹⁵ to 10×10¹⁵ Ω·cm |
| Dielectric Strength | 25 kV/mm |
| Substrate | Lap Shear Strength (N/mm²) |
|---|---|
| Steel (grit blasted) | 18 – 26 |
| Aluminum (etched) | 12 – 19 |
| ABS | 6 – 20 |
| PVC | 6 – 20 |
| Polycarbonate | 5 – 20 |
BERGQUIST® GAP FILLER TGF 2900LVO, a silicone-based 2-component system, delivers optimized heat transfer across ultra-thin bondline interfaces. It is engineered for automotive control modules, high-throughput manufacturing lines, and electronics sensitive to siloxane outgassing, ensuring stable operation in environments spanning -40 °C to +150 °C.
BERGQUIST® LIQUI FORM TLF 10000 addresses critical hotspots in RRU/AAU/BBU units, EV battery packs, 5G antenna modules, industrial controllers, and compact PCBs while stabilizing vertical gaps ≤2.5 mm and preserving electrostatic reliability.
TECHNOMELT® Low Pressure Molding polyamides deliver precision encapsulation of PCBs, PCBAs, connectors, sensors, power modules, LEDs, HVAC controllers, and wearable medical devices, while also enabling leakproof integration in liquid-delivery systems.
Huntsman ARALDITE® systems are designed for • Rotor potting to replace permanent magnets in magnetless motor concepts • Stator encapsulation for enhanced coil protection • High voltage impregnation processes ensuring worker safety and long term adhesion.
Techniq Vietnam provides end-to-end materials and process solutions, integrating world-class technologies in adhesives, soldering, and thermal management.
Through partnerships with leading global brands, we deliver high-value materials, expert consulting, and optimized supply chains ensuring timely delivery, efficiency, and sustainable growth for our clients.
At Techniq, our mission is to connect cutting-edge materials, processes, and equipment with customer needs, enabling efficiency, reliability, and long-term value creation.
HQ address: Thu Duc, Ho Chi Minh City, VietNam
Website: techniq.vn
Email: info@techniq.vn
Tel: +84 88 990 19 29
Copyright © TECHNIQ VIETNAM
Leave your information or connect via Hotline, and our expert team will reach out immediately to provide professional consultation and customized solutions.
Email: info@techniq.vn
Our Technical Support Team is on hand from 8:30 AM to 5:30 PM (GMT+7).
For requests outside these hours, please submit your request form and we will respond at the earliest opportunity.