LOCTITE® 460™ is a low-odor, low-bloom cyanoacrylate adhesive designed for fast bonding of various materials, including metals, plastics, and elastomers. It is particularly effective on porous or absorbent materials such as wood, paper, leather, and fabric. This one-component adhesive requires no mixing and cures upon exposure to humidity.
| Property | Value |
|---|---|
| Specific Gravity @ 25°C | 1.1 |
| Viscosity (mPa·s) @ 25°C | 25-55 (Cone & Plate), 30-50 (Brookfield LVF) |
| Flash Point | See SDS |
Cure is initiated by atmospheric moisture. Full chemical resistance develops after 24 hours.
Fixture Time by Substrate (@22°C, 50% RH):
| Substrate | Fixture Time (seconds) |
| Steel | 10-30 |
| Aluminum | 5-10 |
| Zinc Dichromate | 20-45 |
| Rubber (Neoprene, Nitrile) | <5 |
| ABS, Phenolic, Paper | <5 |
| Polycarbonate | 10-20 |
| PVC | 5-30 |
| Wood (Pine) | 20-30 |
| Leather | 1-10 |
Cure Speed Influencers:
Adhesive Strength (Lap Shear, ISO 4587, N/mm²):
| Material | Strength (N/mm²) |
| Steel (Grit Blasted) | 21 (3,060 psi) |
| Aluminum (Etched) | 18 (2,650 psi) |
| Zinc Dichromate | 2.4 (350 psi) |
| ABS | 7.9 (1,150 psi) |
| PVC | 2.8 (410 psi) |
| Phenolic | 1.5 (220 psi) |
| Polycarbonate | 7.7 (1,120 psi) |
| Nitrile | 1.3 (190 psi) |
| Neoprene | 0.7 (95 psi) substrate failure |
Block Shear Strength (ISO 13445, N/mm²):
| Material | Strength (N/mm²) |
| Polycarbonate | 25 (2,650 psi) |
| PVC | 2.6 (380 psi) |
Strength Retention in Various Conditions (% of Initial Strength)
| Environment | Temperature (°C) | 100 h | 500 h | 1000 h |
| Motor Oil | 40 | 90% | 60% | 95% |
| Unleaded Gasoline | 22 | 90% | 80% | 75% |
| Ethanol | 22 | 90% | 90% | 90% |
| Isopropanol | 22 | 100% | 100% | 100% |
| Water | 22 | 75% | 40% | 35% |
| 98% RH | 40 | 60% | 25% | 70% |
| Water/Glycol | 25 | 90% | 85% | 80% |
BERGQUIST® GAP FILLER TGF 2900LVO, a silicone-based 2-component system, delivers optimized heat transfer across ultra-thin bondline interfaces. It is engineered for automotive control modules, high-throughput manufacturing lines, and electronics sensitive to siloxane outgassing, ensuring stable operation in environments spanning -40 °C to +150 °C.
BERGQUIST® LIQUI FORM TLF 10000 addresses critical hotspots in RRU/AAU/BBU units, EV battery packs, 5G antenna modules, industrial controllers, and compact PCBs while stabilizing vertical gaps ≤2.5 mm and preserving electrostatic reliability.
TECHNOMELT® Low Pressure Molding polyamides deliver precision encapsulation of PCBs, PCBAs, connectors, sensors, power modules, LEDs, HVAC controllers, and wearable medical devices, while also enabling leakproof integration in liquid-delivery systems.
Huntsman ARALDITE® systems are designed for • Rotor potting to replace permanent magnets in magnetless motor concepts • Stator encapsulation for enhanced coil protection • High voltage impregnation processes ensuring worker safety and long term adhesion.
Techniq Vietnam provides end-to-end materials and process solutions, integrating world-class technologies in adhesives, soldering, and thermal management.
Through partnerships with leading global brands, we deliver high-value materials, expert consulting, and optimized supply chains ensuring timely delivery, efficiency, and sustainable growth for our clients.
At Techniq, our mission is to connect cutting-edge materials, processes, and equipment with customer needs, enabling efficiency, reliability, and long-term value creation.
HQ address: Thu Duc, Ho Chi Minh City, VietNam
Website: techniq.vn
Email: info@techniq.vn
Tel: +84 88 990 19 29
Copyright © TECHNIQ VIETNAM
Leave your information or connect via Hotline, and our expert team will reach out immediately to provide professional consultation and customized solutions.
Email: info@techniq.vn
Our Technical Support Team is on hand from 8:30 AM to 5:30 PM (GMT+7).
For requests outside these hours, please submit your request form and we will respond at the earliest opportunity.