LOCTITE® 496™ is a general-purpose, one-part cyanoacrylate adhesive with low viscosity. It is designed for bonding metals, rubbers, and plastics, particularly excelling in metal applications. It cures rapidly upon exposure to atmospheric moisture.
| Property | Value |
|---|---|
| Uncured Properties | |
| Appearance | Transparent, colorless liquid |
| Specific Gravity (@ 25°C) | 1.1 |
| Viscosity (@ 25°C, mPa·s) | 70-120 (Cone & Plate), 100-120 (Brookfield LVF) |
| Cure Mechanism | Humidity-cured |
| Cured Properties | |
| Glass Transition Temperature (°C) | 165 |
| Thermal Conductivity (W/m·K) | 0.1 |
| Dielectric Constant (1 kHz) | 2.75 |
| Volume Resistivity (Ω·cm) | 10¹⁵ |
| Dielectric Breakdown Strength (kV/mm) | 25 |
| Adhesive Strength (Lap Shear, N/mm²) | After 24 hours @ 22°C |
| Steel (grit blasted) | 20-30 (2900-4350 psi) |
| Aluminum (etched) | 15-22 (2175-3190 psi) |
| Zinc dichromate | 4-12 (580-1740 psi) |
| ABS / PVC | 6-20 (870-2900 psi) |
| Polycarbonate | 5-20 (725-2900 psi) |
| Phenolic / Neoprene / Nitrile | 5-15 (725-2175 psi) |
| Environmental Resistance | After 1 week @ 22°C |
| Motor Oil (40°C) | 100% strength retained |
| Gasoline (22°C) | 95% strength retained |
| Isopropanol (22°C) | 95% strength retained |
| Ethanol (22°C) | 100% strength retained |
| Freon TA (22°C) | 95% strength retained |
| Heat & Humidity (40°C, 95% RH) | 70% strength retained (drops to 40% after 1000 hours) |
BERGQUIST® GAP FILLER TGF 2900LVO, a silicone-based 2-component system, delivers optimized heat transfer across ultra-thin bondline interfaces. It is engineered for automotive control modules, high-throughput manufacturing lines, and electronics sensitive to siloxane outgassing, ensuring stable operation in environments spanning -40 °C to +150 °C.
BERGQUIST® LIQUI FORM TLF 10000 addresses critical hotspots in RRU/AAU/BBU units, EV battery packs, 5G antenna modules, industrial controllers, and compact PCBs while stabilizing vertical gaps ≤2.5 mm and preserving electrostatic reliability.
TECHNOMELT® Low Pressure Molding polyamides deliver precision encapsulation of PCBs, PCBAs, connectors, sensors, power modules, LEDs, HVAC controllers, and wearable medical devices, while also enabling leakproof integration in liquid-delivery systems.
Huntsman ARALDITE® systems are designed for • Rotor potting to replace permanent magnets in magnetless motor concepts • Stator encapsulation for enhanced coil protection • High voltage impregnation processes ensuring worker safety and long term adhesion.
Techniq Vietnam provides end-to-end materials and process solutions, integrating world-class technologies in adhesives, soldering, and thermal management.
Through partnerships with leading global brands, we deliver high-value materials, expert consulting, and optimized supply chains ensuring timely delivery, efficiency, and sustainable growth for our clients.
At Techniq, our mission is to connect cutting-edge materials, processes, and equipment with customer needs, enabling efficiency, reliability, and long-term value creation.
HQ address: Thu Duc, Ho Chi Minh City, VietNam
Website: techniq.vn
Email: info@techniq.vn
Tel: +84 88 990 19 29
Copyright © TECHNIQ VIETNAM
Leave your information or connect via Hotline, and our expert team will reach out immediately to provide professional consultation and customized solutions.
Email: info@techniq.vn
Our Technical Support Team is on hand from 8:30 AM to 5:30 PM (GMT+7).
For requests outside these hours, please submit your request form and we will respond at the earliest opportunity.