LOCTITE ABLESTIK 2902 is a two-component epoxy adhesive designed for electronic bonding and sealing applications. It is electrically and thermally conductive, solvent-free, and exhibits high adhesion to various substrates. It can be cured at room temperature or with heat.
Compatible Surfaces: Ceramics, metals, glass, plastic laminates
Operating Temperature: -60 to 110°C
Certifications:
| Property | Value |
|---|---|
| Mixed Viscosity (Brookfield @ 25°C, 10 rpm) | 287,600 mPa·s (cP) |
| Specific Gravity (mixed) | 3.2 |
| Pot Life | 60 minutes |
| Cure Condition | Time |
|---|---|
| Room Temp (25°C) | 24 hours |
| Heat Cure (65°C) | 1-4 hours |
| Property | Value |
|---|---|
| Coefficient of Thermal Expansion | 4.9 × 10⁻⁵ cm/cm/°C |
| Glass Transition Temperature (Tg) | 52°C |
| Thermal Conductivity | 2.99 W/(m-K) |
| Hardness (Shore D) | 80 |
| Property | Value |
|---|---|
| Volume Resistivity | 0.0003 – 0.001 Ω·cm (varies by cure conditions) |
| Cure Condition | Strength (N/mm²) | Strength (psi) |
|---|---|---|
| 110°C for 1 hour | 11 | 1,600 |
| 150°C for 15 minutes | 11 | 1,600 |
| 65°C for 2 hours | 7 | 1,000 |
| 25°C for 24 hours | 5 | 700 |
| Property | Value |
|---|---|
| Total Mass Loss (TML) | 0.64% |
| Collected Volatile Condensable Material (CVCM) | 0.05% |
BERGQUIST® GAP FILLER TGF 2900LVO, a silicone-based 2-component system, delivers optimized heat transfer across ultra-thin bondline interfaces. It is engineered for automotive control modules, high-throughput manufacturing lines, and electronics sensitive to siloxane outgassing, ensuring stable operation in environments spanning -40 °C to +150 °C.
BERGQUIST® LIQUI FORM TLF 10000 addresses critical hotspots in RRU/AAU/BBU units, EV battery packs, 5G antenna modules, industrial controllers, and compact PCBs while stabilizing vertical gaps ≤2.5 mm and preserving electrostatic reliability.
TECHNOMELT® Low Pressure Molding polyamides deliver precision encapsulation of PCBs, PCBAs, connectors, sensors, power modules, LEDs, HVAC controllers, and wearable medical devices, while also enabling leakproof integration in liquid-delivery systems.
Huntsman ARALDITE® systems are designed for • Rotor potting to replace permanent magnets in magnetless motor concepts • Stator encapsulation for enhanced coil protection • High voltage impregnation processes ensuring worker safety and long term adhesion.
Techniq Vietnam provides end-to-end materials and process solutions, integrating world-class technologies in adhesives, soldering, and thermal management.
Through partnerships with leading global brands, we deliver high-value materials, expert consulting, and optimized supply chains ensuring timely delivery, efficiency, and sustainable growth for our clients.
At Techniq, our mission is to connect cutting-edge materials, processes, and equipment with customer needs, enabling efficiency, reliability, and long-term value creation.
HQ address: Thu Duc, Ho Chi Minh City, VietNam
Website: techniq.vn
Email: info@techniq.vn
Tel: +84 88 990 19 29
Copyright © TECHNIQ VIETNAM
Leave your information or connect via Hotline, and our expert team will reach out immediately to provide professional consultation and customized solutions.
Email: info@techniq.vn
Our Technical Support Team is on hand from 8:30 AM to 5:30 PM (GMT+7).
For requests outside these hours, please submit your request form and we will respond at the earliest opportunity.