LOCTITE ABLESTIK NCA 2350 is a one-component, heat-curing epoxy adhesive and sealant. It is specifically designed for camera module housing assembly and heat-sensitive devices. The adhesive features fast curing at low temperatures, excellent adhesion, and good sealing properties.
| Uncured Properties | Value |
|---|---|
| Appearance | Black liquid |
| Viscosity @ 25°C (Brookfield CP51, 5 rpm) | 13,670 mPa·s |
| Thixotropic Index | 3.7 |
| Pot Life @ 25°C | 3 days |
| Shelf Life @ -20°C | 183 days |
| Curing Conditions | Value |
|---|---|
| Heat Cure | 2 min @ 80°C (hot plate) / 30 min @ 80°C (conventional oven) |
| Weight Loss on Cure | 0.21% |
| Cured Properties | Value |
|---|---|
| Hardness (Shore D) | 75 |
| Glass Transition Temperature (Tg) | 28°C |
| Coefficient of Thermal Expansion | 66 ppm/°C (below Tg), 180 ppm/°C (above Tg) |
| Volumetric Shrinkage on Cure | 2.8% |
| Elongation at Break | 110% |
| Tensile Modulus | 2,533 N/mm² (367,380 psi) @ 25°C |
| Tensile Modulus | 30 N/mm² (4,351 psi) @ 85°C |
| Shear Strength (Lap Shear Test) | Value |
|---|---|
| Lap Shear Strength | 18 N/mm² (2,610 psi) |
BERGQUIST® GAP FILLER TGF 2900LVO, a silicone-based 2-component system, delivers optimized heat transfer across ultra-thin bondline interfaces. It is engineered for automotive control modules, high-throughput manufacturing lines, and electronics sensitive to siloxane outgassing, ensuring stable operation in environments spanning -40 °C to +150 °C.
BERGQUIST® LIQUI FORM TLF 10000 addresses critical hotspots in RRU/AAU/BBU units, EV battery packs, 5G antenna modules, industrial controllers, and compact PCBs while stabilizing vertical gaps ≤2.5 mm and preserving electrostatic reliability.
TECHNOMELT® Low Pressure Molding polyamides deliver precision encapsulation of PCBs, PCBAs, connectors, sensors, power modules, LEDs, HVAC controllers, and wearable medical devices, while also enabling leakproof integration in liquid-delivery systems.
Huntsman ARALDITE® systems are designed for • Rotor potting to replace permanent magnets in magnetless motor concepts • Stator encapsulation for enhanced coil protection • High voltage impregnation processes ensuring worker safety and long term adhesion.
Techniq Vietnam provides end-to-end materials and process solutions, integrating world-class technologies in adhesives, soldering, and thermal management.
Through partnerships with leading global brands, we deliver high-value materials, expert consulting, and optimized supply chains ensuring timely delivery, efficiency, and sustainable growth for our clients.
At Techniq, our mission is to connect cutting-edge materials, processes, and equipment with customer needs, enabling efficiency, reliability, and long-term value creation.
HQ address: Thu Duc, Ho Chi Minh City, VietNam
Website: techniq.vn
Email: info@techniq.vn
Tel: +84 88 990 19 29
Copyright © TECHNIQ VIETNAM
Leave your information or connect via Hotline, and our expert team will reach out immediately to provide professional consultation and customized solutions.
Email: info@techniq.vn
Our Technical Support Team is on hand from 8:30 AM to 5:30 PM (GMT+7).
For requests outside these hours, please submit your request form and we will respond at the earliest opportunity.