LOCTITE STYCAST 1269A is a two-component, crystal-clear, heat-cured epoxy encapsulant designed for high optical clarity and excellent high-temperature performance (up to 120°C). It offers strong resistance to discoloration and is suitable for display embedment, casting optical lenses and prisms, and encapsulating LEDs.
| Property | Part A (Resin) | Part B (Hardener) | Mixed | Cured |
|---|---|---|---|---|
| Appearance | Blue tinted liquid | Slightly yellow liquid | – | – |
| Specific Gravity @ 25°C | 1.17 | 1.16 | 1.16 | 1.2 |
| Viscosity @ 25°C (mPa·s) | 10,000 | 2,300 | 3,000 | – |
| Pot Life (100g @ 25°C) | – | – | >8 hours | – |
| Hardness (Durometer, D) | – | – | – | 87 |
| Glass Transition Temperature (Tg, °C) | – | – | – | 67 |
| Flexural Strength @ 25°C (N/mm² / psi) | – | – | – | 114 / 16,534 |
| Flexural Modulus @ 25°C (N/mm² / psi) | – | – | – | 2,960 / 429,311 |
| Coefficient of Thermal Expansion (1/°C) | – | – | – | Below Tg: 70×10⁻⁶ / Above Tg: 209×10⁻⁶ |
| Water Absorption (1hr @ 100°C, %) | – | – | – | 0.5 |
| Refractive Index @ 25°C | – | – | – | 1.541 |
| Light Transmittance @ 450nm, t=3mm, % | – | – | – | 90 |
BERGQUIST® GAP FILLER TGF 2900LVO, a silicone-based 2-component system, delivers optimized heat transfer across ultra-thin bondline interfaces. It is engineered for automotive control modules, high-throughput manufacturing lines, and electronics sensitive to siloxane outgassing, ensuring stable operation in environments spanning -40 °C to +150 °C.
BERGQUIST® LIQUI FORM TLF 10000 addresses critical hotspots in RRU/AAU/BBU units, EV battery packs, 5G antenna modules, industrial controllers, and compact PCBs while stabilizing vertical gaps ≤2.5 mm and preserving electrostatic reliability.
TECHNOMELT® Low Pressure Molding polyamides deliver precision encapsulation of PCBs, PCBAs, connectors, sensors, power modules, LEDs, HVAC controllers, and wearable medical devices, while also enabling leakproof integration in liquid-delivery systems.
Huntsman ARALDITE® systems are designed for • Rotor potting to replace permanent magnets in magnetless motor concepts • Stator encapsulation for enhanced coil protection • High voltage impregnation processes ensuring worker safety and long term adhesion.
Techniq Vietnam provides end-to-end materials and process solutions, integrating world-class technologies in adhesives, soldering, and thermal management.
Through partnerships with leading global brands, we deliver high-value materials, expert consulting, and optimized supply chains ensuring timely delivery, efficiency, and sustainable growth for our clients.
At Techniq, our mission is to connect cutting-edge materials, processes, and equipment with customer needs, enabling efficiency, reliability, and long-term value creation.
HQ address: Thu Duc, Ho Chi Minh City, VietNam
Website: techniq.vn
Email: info@techniq.vn
Tel: +84 88 990 19 29
Copyright © TECHNIQ VIETNAM
Leave your information or connect via Hotline, and our expert team will reach out immediately to provide professional consultation and customized solutions.
Email: info@techniq.vn
Our Technical Support Team is on hand from 8:30 AM to 5:30 PM (GMT+7).
For requests outside these hours, please submit your request form and we will respond at the earliest opportunity.