LOCTITE STYCAST E 2517 is a one-component epoxy encapsulant designed for bare chip protection in advanced electronic packages. It features low viscosity, low stress, low coefficient of thermal expansion (CTE), and high-temperature resistance up to 200°C. The product is heat-curing and is optimized for applications requiring high thermal stability.
| Property | Value |
|---|---|
| Appearance | Black liquid |
| Viscosity (mPa·s @ 25°C) | 22,500 |
| Density (g/cm³) | 1.725 |
| Shelf Life (at -40 to 0°C) | 120 days |
| Cure Stage | Temperature | Duration |
|---|---|---|
| Pre-cure | 120°C | 1 hour |
| Full cure | 150°C | 1 hour |
| Post cure | 200°C | 2 hours |
| Property | Value |
|---|---|
| Hardness (Shore D) | 90 |
| Coefficient of Thermal Expansion (ppm/°C) | 19 |
| Glass Transition Temperature (°C) | 220 |
| Young’s Modulus (N/mm²) | 6,300 |
| Water Absorption (24h @ 25°C, %) | 0.08 |
| Thermal Conductivity (W/m-K) | 0.5 |
| Property | Value |
|---|---|
| Dielectric Constant (1 kHz) | 4.1 |
| Dissipation Factor (1 kHz) | 0.007 |
| Volume Resistivity (Ω·cm) | 1.9 × 10¹⁵ |
BERGQUIST® GAP FILLER TGF 2900LVO, a silicone-based 2-component system, delivers optimized heat transfer across ultra-thin bondline interfaces. It is engineered for automotive control modules, high-throughput manufacturing lines, and electronics sensitive to siloxane outgassing, ensuring stable operation in environments spanning -40 °C to +150 °C.
BERGQUIST® LIQUI FORM TLF 10000 addresses critical hotspots in RRU/AAU/BBU units, EV battery packs, 5G antenna modules, industrial controllers, and compact PCBs while stabilizing vertical gaps ≤2.5 mm and preserving electrostatic reliability.
TECHNOMELT® Low Pressure Molding polyamides deliver precision encapsulation of PCBs, PCBAs, connectors, sensors, power modules, LEDs, HVAC controllers, and wearable medical devices, while also enabling leakproof integration in liquid-delivery systems.
Huntsman ARALDITE® systems are designed for • Rotor potting to replace permanent magnets in magnetless motor concepts • Stator encapsulation for enhanced coil protection • High voltage impregnation processes ensuring worker safety and long term adhesion.
Techniq Vietnam provides end-to-end materials and process solutions, integrating world-class technologies in adhesives, soldering, and thermal management.
Through partnerships with leading global brands, we deliver high-value materials, expert consulting, and optimized supply chains ensuring timely delivery, efficiency, and sustainable growth for our clients.
At Techniq, our mission is to connect cutting-edge materials, processes, and equipment with customer needs, enabling efficiency, reliability, and long-term value creation.
HQ address: Thu Duc, Ho Chi Minh City, VietNam
Website: techniq.vn
Email: info@techniq.vn
Tel: +84 88 990 19 29
Copyright © TECHNIQ VIETNAM
Leave your information or connect via Hotline, and our expert team will reach out immediately to provide professional consultation and customized solutions.
Email: info@techniq.vn
Our Technical Support Team is on hand from 8:30 AM to 5:30 PM (GMT+7).
For requests outside these hours, please submit your request form and we will respond at the earliest opportunity.