LOCTITE STYCAST ES 0626 is a two-component, white epoxy casting system designed for potting and encapsulating applications. It offers low abrasion, rapid gel properties, and heat curing.
| Property | Part A (Resin) | Part B (Hardener) | Mixed |
|---|---|---|---|
| Appearance | White | Amber | White (Cured) |
| Density @ 25°C (g/cm³) | 1.71 | 0.96 | – |
| Viscosity @ 25°C (cP) | 15,000 | 400 | 2,650 |
| Solids Content (%) | 100 | 100 | – |
| Filler Content (%) | 56.5 | 0 | – |
| Pot Life @ 25°C (200g mass) | – | – | 60 min |
| Gel Time @ 85°C | – | – | 13 min |
| Condition | Cure Time |
|---|---|
| Recommended Cure | 2 hours @ 60°C |
| Alternate Cure | 1 hour @ 85°C |
| Property | Value |
|---|---|
| Shore Hardness (Durometer D) | 74 |
| Glass Transition Temperature (°C) | 40 |
| Coefficient of Thermal Expansion (ppm/°C) | Alpha 1: 92, Alpha 2: 155 |
| Elongation (%) | 27 |
| Tensile Strength (psi) | 1,091 |
| Linear Shrinkage (%) | 1.3 |
| Thermal Conductivity (cal/cm·sec·°C) | 9.27 × 10⁻⁴ |
| Property | Value |
|---|---|
| Dielectric Strength (10 mil thickness, V/mil) | 1,430 |
| Dielectric Constant / Dissipation Factor @ 25°C, 1kHz | 5.6 / 0.048 |
| Volume Resistivity (Ω·cm) | 1.2 × 10¹⁶ |
| Surface Resistivity (Ω) | 1.0 × 10¹⁴ |
BERGQUIST® GAP FILLER TGF 2900LVO, a silicone-based 2-component system, delivers optimized heat transfer across ultra-thin bondline interfaces. It is engineered for automotive control modules, high-throughput manufacturing lines, and electronics sensitive to siloxane outgassing, ensuring stable operation in environments spanning -40 °C to +150 °C.
BERGQUIST® LIQUI FORM TLF 10000 addresses critical hotspots in RRU/AAU/BBU units, EV battery packs, 5G antenna modules, industrial controllers, and compact PCBs while stabilizing vertical gaps ≤2.5 mm and preserving electrostatic reliability.
TECHNOMELT® Low Pressure Molding polyamides deliver precision encapsulation of PCBs, PCBAs, connectors, sensors, power modules, LEDs, HVAC controllers, and wearable medical devices, while also enabling leakproof integration in liquid-delivery systems.
Huntsman ARALDITE® systems are designed for • Rotor potting to replace permanent magnets in magnetless motor concepts • Stator encapsulation for enhanced coil protection • High voltage impregnation processes ensuring worker safety and long term adhesion.
Techniq Vietnam provides end-to-end materials and process solutions, integrating world-class technologies in adhesives, soldering, and thermal management.
Through partnerships with leading global brands, we deliver high-value materials, expert consulting, and optimized supply chains ensuring timely delivery, efficiency, and sustainable growth for our clients.
At Techniq, our mission is to connect cutting-edge materials, processes, and equipment with customer needs, enabling efficiency, reliability, and long-term value creation.
HQ address: Thu Duc, Ho Chi Minh City, VietNam
Website: techniq.vn
Email: info@techniq.vn
Tel: +84 88 990 19 29
Copyright © TECHNIQ VIETNAM
Leave your information or connect via Hotline, and our expert team will reach out immediately to provide professional consultation and customized solutions.
Email: info@techniq.vn
Our Technical Support Team is on hand from 8:30 AM to 5:30 PM (GMT+7).
For requests outside these hours, please submit your request form and we will respond at the earliest opportunity.