LOCTITE STYCAST US 0152 is a two-component, unfilled, low-viscosity urethane potting and encapsulation compound. It provides excellent low-temperature properties and surface finish, making it ideal for protecting electronics in applications such as under-the-hood automotive and marine environments. Its low glass transition temperature prevents damage to sensitive components during temperature fluctuations.
| Property | Value |
|---|---|
| Viscosity @ 23°C | 450 cps |
| Density @ 23°C | 1.0 g/cm³ |
| Pot Life @ 23°C (100g mass) | < 60 min |
| Cure Schedule | Condition |
|---|---|
| Recommended Cure | 24 hrs @ 23°C |
| Alternate Cure | 2 – 4 hrs @ 60 – 85°C |
| Property | Value |
|---|---|
| Hardness | Shore A 35 |
| Glass Transition Temperature (Tg) | -38°C |
| Coefficient of Thermal Expansion | 272 ppm/°C |
| Tensile Strength | 100 psi |
| Elongation | 180% |
| Thermal Conductivity | 0.172 W/m-K |
| Moisture Absorption (24 hrs) | 0.78% |
| Weight Loss after 168 hrs @ 125°C | 0.14% |
| Linear Shrinkage | <1.0% |
| Property | Value |
|---|---|
| Dielectric Strength (20 mil thickness) | 1,170 V/mil |
| Dielectric Constant (1 kHz) | 6.52 |
| Dielectric Constant (100 kHz) | 5.31 |
| Volume Resistivity | 1.9 × 10¹¹ Ω·cm |
| Surface Resistivity | 1.4 × 10¹³ Ω |
BERGQUIST® GAP FILLER TGF 2900LVO, a silicone-based 2-component system, delivers optimized heat transfer across ultra-thin bondline interfaces. It is engineered for automotive control modules, high-throughput manufacturing lines, and electronics sensitive to siloxane outgassing, ensuring stable operation in environments spanning -40 °C to +150 °C.
BERGQUIST® LIQUI FORM TLF 10000 addresses critical hotspots in RRU/AAU/BBU units, EV battery packs, 5G antenna modules, industrial controllers, and compact PCBs while stabilizing vertical gaps ≤2.5 mm and preserving electrostatic reliability.
TECHNOMELT® Low Pressure Molding polyamides deliver precision encapsulation of PCBs, PCBAs, connectors, sensors, power modules, LEDs, HVAC controllers, and wearable medical devices, while also enabling leakproof integration in liquid-delivery systems.
Huntsman ARALDITE® systems are designed for • Rotor potting to replace permanent magnets in magnetless motor concepts • Stator encapsulation for enhanced coil protection • High voltage impregnation processes ensuring worker safety and long term adhesion.
Techniq Vietnam provides end-to-end materials and process solutions, integrating world-class technologies in adhesives, soldering, and thermal management.
Through partnerships with leading global brands, we deliver high-value materials, expert consulting, and optimized supply chains ensuring timely delivery, efficiency, and sustainable growth for our clients.
At Techniq, our mission is to connect cutting-edge materials, processes, and equipment with customer needs, enabling efficiency, reliability, and long-term value creation.
HQ address: Thu Duc, Ho Chi Minh City, VietNam
Website: techniq.vn
Email: info@techniq.vn
Tel: +84 88 990 19 29
Copyright © TECHNIQ VIETNAM
Leave your information or connect via Hotline, and our expert team will reach out immediately to provide professional consultation and customized solutions.
Email: info@techniq.vn
Our Technical Support Team is on hand from 8:30 AM to 5:30 PM (GMT+7).
For requests outside these hours, please submit your request form and we will respond at the earliest opportunity.