Industries

Automotive
Composites
Electronics Assembly
General Industries
Home Appliances
Medical Device

Mould Release Agent QZ 66 – solvent-free silicone oil for easy demoulding of Araldite® epoxy castings, mouldings, and laminates.

  • Item Name: Mould Release Agent QZ 66

  • Manufacturer: Huntsman Advanced Materials

  • Technologies: Solvent-free silicone-based mould release agent

  • Color: Colorless, clear liquid

  • Cure Type: Not applicable (release agent, solvent-free)

  • Package Size: Contact to Techniq VN for details.

  • Shelf Life: 12 months

1. Product Overview

Mould Release Agent QZ 66 is a solvent-free, low-viscosity silicone oil used for the pre-treatment of moulds and models.

  • Provides optimum release effects for cold- or hot-cured Araldite® epoxy castings, mouldings, or laminates.

  • Non-corrosive to epoxy or metal moulds, works up to 250 °C.

  • Requires only a thin application; fast drying, low mould build-up.

  • Form: clear, colourless liquid, supplied in cans.


2. Applications

  • Ensures easy demoulding of Araldite® epoxy castings and laminates.

  • Suitable for steel or aluminium moulds, applied as thin film.

  • Improves surface detail reproduction and glossy finish.

  • Allows multiple demould cycles from a single application (though re-application after each use is recommended).

  • Applied by brush, rag, spray gun, or vaporiser.

3. Typical Properties

A. Product Data (Unmixed)

Property Value
Form Clear, colourless liquid
Chemistry Low-viscosity silicone oil
Viscosity ~17 mPa·s
Specific Gravity ~0.95 g/cm³
Flash Point (DIN 53213) 99 °C
Refractive Index (20 °C) 1.396 – 1.412
Temperature Resistance Up to 250 °C
Shelf Life (sealed, 6–28 °C) 12 months

BERGQUIST microTIM mTIM 1028 Thermal Interface Coating High performance thermal management solution for nickel finished heat sinks, optical transceivers, and data center liquid cooling systems

BERGQUIST microTIM mTIM 1028 is purpose built for riding cage assemblies in servers, switches, and routers, interfacing with electroless nickel plated copper or aluminum heat sinks. It ensures stable operation in high power transceiver modules while also extending applicability to liquid cooling components, heat pipes, and fin based dissipative structures.

RELATED PRODUCT

Contact Technical Support

Leave your information or connect via Hotline, and our expert team will reach out immediately to provide professional consultation and customized solutions.

(+84) 889 901 929

Email: info@techniq.vn

Our Technical Support Team is on hand from 8:30 AM to 5:30 PM (GMT+7).

For requests outside these hours, please submit your request form and we will respond at the earliest opportunity.