Item Name: RTV100 Series (RTV102, RTV103, RTV106, RTV108, RTV109, RTV112, RTV116, RTV118)
Manufacturer: Momentive Performance Materials
Technologies: One-component, acetic acid cure, silicone adhesive/sealants (paste and self-leveling grades)
Color: RTV102 (White), RTV103 (Black), RTV106 (Red), RTV108 (Translucent), RTV109 (Aluminum), RTV112 (White), RTV116 (Red), RTV118 (Translucent)
Cure Type: Room temperature, moisture cure (acetic acid release)
Package Size: 100 g aluminum tubes, 300/333 ml cartridges, bulk containers
Shelf Life: Contact to Techniq VN for details
The RTV100 Series consists of one-component, ready-to-use silicone adhesive sealants that cure at room temperature via atmospheric moisture. They form durable, resilient silicone rubber, releasing acetic acid vapors during cure. The series includes paste-consistency and self-leveling products suitable for vertical, overhead, or difficult-to-reach surfaces. These sealants provide low-temperature flexibility, high-temperature performance, excellent weatherability, ozone and chemical resistance, and superior electrical insulation. Cure depth should not exceed 6mm (1/4 in.), and primers may be recommended for certain difficult-to-bond substrates.
General-purpose bonding, sealing, and electrical insulation
Formed-in-place gaskets for vertical or overhead surfaces (paste products)
Thin-section potting, filling small voids, and self-leveling protective coatings (self-leveling products)
High-temperature sealing for heating elements and critical bonding applications
Food contact surfaces in compliance with FDA, USDA, and NSF standards
UL-recognized applications and certain MIL-A-46106 general- and high-temperature specifications
| Property | Unit | RTV102 / RTV103 / RTV108 / RTV109 | RTV106 / RTV116 / RTV112 / RTV118 |
|---|---|---|---|
| Consistency | – | Paste / Paste / Self-leveling / Self-leveling | Paste / Self-leveling / Self-leveling / Self-leveling |
| Color | – | White / Black / Translucent / Aluminum | Red / Red / White / Translucent |
| Viscosity | poises | – / – / 250 / 200 | – |
| Application Rate | g/min | 400 / 400 / – / – | – |
| Specific Gravity | g/cm³ | 1.05 / 1.07 / 1.09 / 1.05 | – |
| Tack-Free Time | min | 20 / 20 / 30 / 20 | – |
| Hardness, Shore A | – | 30 / 30 / 20 / 25 | – |
| Tensile Strength | kg/cm² | 28 / 26 / 25 / 23 | – |
| Elongation | % | 450 / 400 / 350 / 325 | – |
| Tear Strength | kg/cm | 8 / 7 / – / – | – |
| Shear Strength | kg/cm² | 14 / 14 / 7 / 7 | – |
| Peel Strength | kg/cm | 7 / 7 / 3 / 3 | – |
| Dielectric Strength | kV/mm | 20 / 20 / 16 / 16 | – |
| Dielectric Constant @ 60Hz | – | 2.8 | – |
| Dissipation Factor @ 60Hz | – | 0.001 | – |
| Volume Resistivity | ohm·cm | 3×10¹⁵ / 3×10¹⁴ / 2×10¹⁴ / 6×10¹⁴ | – |
| Brittle Point | °C | -60 | – |
| Max Continuous Temp | °C | 204 / 260 / 260 / 204 | – |
| Max Intermittent Temp | °C | 260 / 315 / 315 / 260 | – |
| Linear Shrinkage | % | 1.0 | – |
| Thermal Conductivity | cal/sec/cm²·°C/cm | 0.0005 | – |
| Coefficient of Expansion | cm/cm·°C | 27×10⁻⁵ | – |
LOCTITE ECCOBOND UF 9000AG-061 is specifically formulated for FCBGA and Cu pillar flip chip packaging, ensuring robust solder joint encapsulation under extreme electrothermal cycling from -65 °C to 150 °C. Its superior capillary flow also optimizes throughput in automated assembly lines for high-density ICs.
BERGQUIST microTIM mTIM 1028 is purpose built for riding cage assemblies in servers, switches, and routers, interfacing with electroless nickel plated copper or aluminum heat sinks. It ensures stable operation in high power transceiver modules while also extending applicability to liquid cooling components, heat pipes, and fin based dissipative structures.
LOCTITE® ABLESTIK NCA 3218 is specifically formulated for ADAS optical modules, ensuring secure bonding in lens barrel to housing and lens housing to circuit board interfaces where dimensional accuracy and dielectric integrity are non negotiable.
Loctite® 3296, a dual cure (UV & thermal) adhesive, is engineered for active alignment assembly of ADAS cameras and LiDAR modules. Its optimized bonding to aluminum and FR4 substrates ensures secure fixation of optical components while enabling nanometer level alignment critical for high resolution imaging.
Techniq Vietnam provides end-to-end materials and process solutions, integrating world-class technologies in adhesives, soldering, and thermal management.
Through partnerships with leading global brands, we deliver high-value materials, expert consulting, and optimized supply chains ensuring timely delivery, efficiency, and sustainable growth for our clients.
At Techniq, our mission is to connect cutting-edge materials, processes, and equipment with customer needs, enabling efficiency, reliability, and long-term value creation.
Tel: +84 88 990 19 29
Copyright © TECHNIQ VIETNAM
Leave your information or connect via Hotline, and our expert team will reach out immediately to provide professional consultation and customized solutions.
Email: info@techniq.vn
Our Technical Support Team is on hand from 8:30 AM to 5:30 PM (GMT+7).
For requests outside these hours, please submit your request form and we will respond at the earliest opportunity.