TEROSON MS 9120 SF is a one-component, silane-modified polymer-based car body sealant that cures by absorbing moisture from the air. It is solvent-free, isocyanate-free, silicone-free, and PVC-free, with a neutral odor. The product provides good UV resistance and adheres to various substrates without a primer. It is also spot-weldable when uncured and can be overpainted using 1- or 2-component car repair paints.
TEROSON MS 9120 SF is ideal for:
| Property | Value |
|---|---|
| Appearance | White, Grey, Black |
| Consistency | Pasty |
| Density | ~1.6 g/cm³ |
| Odor | Almost imperceptible |
| Curing Mechanism | Humidity curing |
| Property | Value |
|---|---|
| Skin Formation Time (+23°C, 50% RH) | ~8 minutes |
| Cure Rate (24h) | ~5 mm |
| Property | Value |
|---|---|
| Shore A Hardness (DIN 53505) | ~50 |
| Tensile Strength (DIN 53504) | ~3 MPa |
| Elongation at Break (DIN 53504) | ~250% |
| Volume Change (DIN 52451) | 7% |
| Paint Compatibility | Yes |
| Service Temperature Range | -30°C to 90°C |
| Short-Term Exposure (1h) | Up to 120°C |
BERGQUIST® GAP FILLER TGF 2900LVO, a silicone-based 2-component system, delivers optimized heat transfer across ultra-thin bondline interfaces. It is engineered for automotive control modules, high-throughput manufacturing lines, and electronics sensitive to siloxane outgassing, ensuring stable operation in environments spanning -40 °C to +150 °C.
BERGQUIST® LIQUI FORM TLF 10000 addresses critical hotspots in RRU/AAU/BBU units, EV battery packs, 5G antenna modules, industrial controllers, and compact PCBs while stabilizing vertical gaps ≤2.5 mm and preserving electrostatic reliability.
TECHNOMELT® Low Pressure Molding polyamides deliver precision encapsulation of PCBs, PCBAs, connectors, sensors, power modules, LEDs, HVAC controllers, and wearable medical devices, while also enabling leakproof integration in liquid-delivery systems.
Huntsman ARALDITE® systems are designed for • Rotor potting to replace permanent magnets in magnetless motor concepts • Stator encapsulation for enhanced coil protection • High voltage impregnation processes ensuring worker safety and long term adhesion.
Techniq Vietnam provides end-to-end materials and process solutions, integrating world-class technologies in adhesives, soldering, and thermal management.
Through partnerships with leading global brands, we deliver high-value materials, expert consulting, and optimized supply chains ensuring timely delivery, efficiency, and sustainable growth for our clients.
At Techniq, our mission is to connect cutting-edge materials, processes, and equipment with customer needs, enabling efficiency, reliability, and long-term value creation.
HQ address: Thu Duc, Ho Chi Minh City, VietNam
Website: techniq.vn
Email: info@techniq.vn
Tel: +84 88 990 19 29
Copyright © TECHNIQ VIETNAM
Leave your information or connect via Hotline, and our expert team will reach out immediately to provide professional consultation and customized solutions.
Email: info@techniq.vn
Our Technical Support Team is on hand from 8:30 AM to 5:30 PM (GMT+7).
For requests outside these hours, please submit your request form and we will respond at the earliest opportunity.