• Item Name: Elan-tron® PU 4025 / PH 4900
• Manufacturer: ELANTAS Beck GmbH
• Technologies: Filled, soft flexible polyurethane, low shrinkage, electrical insulating, low-temperature flexibility, vibration damping
• Color: Resin – Dark blue, Hardener – Brown transparent
• Cure Type: Room temperature (6–8 h) or 90°C (1–1.5 h), post-cure recommended
• Package Size: Contact to Techniq VN for details.
• Shelf Life: 6 months
Elan-tron® PU 4025 with Hardener PH 4900 is a soft, flexible polyurethane casting compound designed for high electrical insulation with low shrinkage. Its elastic nature minimizes internal stresses caused by temperature variations, material expansion, or contraction. The formulation ensures vibration damping, resilience under mechanical stress, and durability even at low temperatures down to –40 °C. The cured system maintains good adhesion, stable dielectric properties, and thermal resistance up to 115 °C, while also meeting RoHS compliance.
The system is ideally suited for casting mechanically sensitive electrical and electronic components. It reduces material stress from shrinkage or temperature changes, making it effective for use in sensors, automotive electronics, and components exposed to vibration or acceleration forces, such as impact drills. Its vibration-damping properties also support reliability in sensitive devices requiring long-term mechanical stability.
| Property | Resin (PU 4025) | Hardener (PH 4900) |
|---|---|---|
| Appearance | Dark blue | Brown transparent |
| Viscosity at 25°C (mPa·s) | 1050 ±150 | 110 ±30 |
| Density at 20°C (g/cm³) | 1.40 ±0.05 | 1.23 ±0.05 |
| Shelf Life (23°C) | 6 months | 6 months |
| Property | Value |
|---|---|
| Mix Ratio (by weight) | 100:25 |
| Mixed Viscosity at 25°C (mPa·s) | ~800 |
| Processing Time (23°C, 15 ml) | ~150 min |
| Curing (Room Temp) | 6–8 h (full after 3–4 days) |
| Curing (90°C) | 1–1.5 h |
| Post-Cure | 12–16 h at 80°C |
| Property | Value |
|---|---|
| Specific Gravity (20°C) | 1.36 ±0.05 g/cm³ |
| Hardness | 70 ±10 Shore A |
| Tensile Strength | 3.01 MPa |
| Tensile Modulus | 8.11 MPa |
| Elongation at Break | 50% |
| Thermal Conductivity | 0.36 W/m·K |
| Glass Transition Temperature | –10 °C |
| Linear Expansion Coefficient | 216 ×10⁻⁶ K⁻¹ |
| Dielectric Strength | 22 kV/mm |
| Dielectric Constant (23°C, 50 Hz) | 4.2 |
| Volume Resistivity | 2 ×10¹³ Ω·cm |
| Tracking Resistance (CTI) | 600 |
| Water Absorption (24h RT) | 0.36% |
LOCTITE ECCOBOND UF 9000AG-061 is specifically formulated for FCBGA and Cu pillar flip chip packaging, ensuring robust solder joint encapsulation under extreme electrothermal cycling from -65 °C to 150 °C. Its superior capillary flow also optimizes throughput in automated assembly lines for high-density ICs.
BERGQUIST microTIM mTIM 1028 is purpose built for riding cage assemblies in servers, switches, and routers, interfacing with electroless nickel plated copper or aluminum heat sinks. It ensures stable operation in high power transceiver modules while also extending applicability to liquid cooling components, heat pipes, and fin based dissipative structures.
LOCTITE® ABLESTIK NCA 3218 is specifically formulated for ADAS optical modules, ensuring secure bonding in lens barrel to housing and lens housing to circuit board interfaces where dimensional accuracy and dielectric integrity are non negotiable.
Loctite® 3296, a dual cure (UV & thermal) adhesive, is engineered for active alignment assembly of ADAS cameras and LiDAR modules. Its optimized bonding to aluminum and FR4 substrates ensures secure fixation of optical components while enabling nanometer level alignment critical for high resolution imaging.
Leave your information or connect via Hotline, and our expert team will reach out immediately to provide professional consultation and customized solutions.
Email: info@techniq.vn
Our Technical Support Team is on hand from 8:30 AM to 5:30 PM (GMT+7).
For requests outside these hours, please submit your request form and we will respond at the earliest opportunity.