Item Name: DOWSIL™ EA-6060 Adhesive
Manufacturer: The Dow Chemical Company
Technologies: Two-part addition-cure silicone adhesive with optimized adhesion and void-reducing scavenger
Color: Part A – Black, Part B – White
Cure Type: Heat accelerated cure at 80–100°C
Package Size: Contact to Techniq VN for details
Shelf Life: Contact to Techniq VN for details
DOWSIL™ EA-6060 is a two-part, non-flowing silicone adhesive engineered for durable bonding in automotive assemblies. It cures rapidly at moderate temperatures, achieving adhesion in as little as 10–30 minutes (80–100 °C). The formulation incorporates a scavenger system to minimize voids and a UV dye for inspection, ensuring production efficiency and reliability. Once cured, the adhesive maintains flexibility, strong adhesion, and electrical insulation across a wide temperature range (–45 to +200 °C).
Automotive modules such as control units and sensors.
Lid sealing, base plate attachment, and gasketing in electronic housings.
Connector sealing requiring dependable adhesion to metals and plastics.
Environments demanding fast cure, structural reliability, and thermal cycling resistance.
| Property | Unit | Result |
|---|---|---|
| Still Not Mixed (Uncured) | ||
| One or Two-Part | – | Two |
| Mix Ratio | – | 1:1 (weight/volume) |
| Color (Part A / Part B) | – | Black / White |
| Viscosity (Part A / B / Mixed) | Pa·s | 190 / 90 / 115 |
| Thixotropic Index (Mixed) | – | 3.7 |
| Specific Gravity (Part A / B) | – | 1.3 / 1.2 |
| After Mixed / Cured | ||
| Working Time @ 25 °C | hour | 1 |
| Open Time @ 25 °C | hour | <2 |
| Cure Time to Build Adhesion: 80 / 90 / 100 °C | minutes | 30 / 15 / 10 |
| Specific Gravity | – | 1.25 |
| Tensile Strength | MPa | 3.1 |
| Elongation | % | 290 |
| Durometer | Shore A | 42 |
| Linear CTE (–45 to 200 °C) | ppm/°C | 214 |
| Unprimed Adhesion Lap Shear (Al, PBT, PA 66) | MPa | 2.3–2.8 |
| Dielectric Strength | kV/mm | 18 |
| Service Temperature Range | °C | –45 to +200 (short-term –55) |
BERGQUIST® GAP FILLER TGF 2900LVO, a silicone-based 2-component system, delivers optimized heat transfer across ultra-thin bondline interfaces. It is engineered for automotive control modules, high-throughput manufacturing lines, and electronics sensitive to siloxane outgassing, ensuring stable operation in environments spanning -40 °C to +150 °C.
BERGQUIST® LIQUI FORM TLF 10000 addresses critical hotspots in RRU/AAU/BBU units, EV battery packs, 5G antenna modules, industrial controllers, and compact PCBs while stabilizing vertical gaps ≤2.5 mm and preserving electrostatic reliability.
TECHNOMELT® Low Pressure Molding polyamides deliver precision encapsulation of PCBs, PCBAs, connectors, sensors, power modules, LEDs, HVAC controllers, and wearable medical devices, while also enabling leakproof integration in liquid-delivery systems.
Huntsman ARALDITE® systems are designed for • Rotor potting to replace permanent magnets in magnetless motor concepts • Stator encapsulation for enhanced coil protection • High voltage impregnation processes ensuring worker safety and long term adhesion.
Techniq Vietnam provides end-to-end materials and process solutions, integrating world-class technologies in adhesives, soldering, and thermal management.
Through partnerships with leading global brands, we deliver high-value materials, expert consulting, and optimized supply chains ensuring timely delivery, efficiency, and sustainable growth for our clients.
At Techniq, our mission is to connect cutting-edge materials, processes, and equipment with customer needs, enabling efficiency, reliability, and long-term value creation.
HQ address: Thu Duc, Ho Chi Minh City, VietNam
Website: techniq.vn
Email: info@techniq.vn
Tel: +84 88 990 19 29
Copyright © TECHNIQ VIETNAM
Leave your information or connect via Hotline, and our expert team will reach out immediately to provide professional consultation and customized solutions.
Email: info@techniq.vn
Our Technical Support Team is on hand from 8:30 AM to 5:30 PM (GMT+7).
For requests outside these hours, please submit your request form and we will respond at the earliest opportunity.